EU Press Safety & Market Access

We help press manufacturers and EU importers assess the safety of machines intended for the European market. We review how operators will use the press, how its safeguards work and what evidence supports the safety of the machine being supplied.

Our EU Press Safety Design Review gives your engineering or purchasing team a written assessment of a specific model. You can use the findings to make design decisions, clarify requirements with a supplier and plan the checks still needed before delivery.

Discuss your press project →

When to involve us

For manufacturers developing a press for the EU. An early review is most useful while your engineering team can still change the design. We can assess a new machine series, an existing model being introduced to Europe or a variant with a different drive, control system or tooling arrangement. Together, we establish which parts of the existing safety concept carry over and which need further engineering or testing.

For EU importers assessing a machine before purchase. A supplier’s offer may list the safety controller, protective devices and operating modes. Before placing the order, you may also need to know how those elements work together on the machine your customer will receive. We review the proposed configuration and identify the technical points to settle with the manufacturer, the supporting documents to request and the functions to demonstrate at factory acceptance.

What we review

We start with the machine model, the operations it is intended to perform and the configuration planned for delivery. The press type determines where we look first.

Press brakes
How the operator holds and positions the workpiece, how the bending line is safeguarded with the intended tooling, and how stopping performance affects the protection provided.
Mechanical presses
How the stroke is initiated and stopped, how access to the die area is controlled during production and setting, and how the clutch and brake are monitored where fitted.
Hydraulic presses
How the control system and hydraulic circuit stop hazardous ram movement, how the design addresses unintended descent, and how operators access the tooling during setting.

For example, a press brake intended for both flat parts and box bending may use different protective-field settings during those operations. We examine the intended sequence for each operation and the evidence that the press stops as required in that configuration. This gives the manufacturer a specific engineering question to resolve while the machine is still at the factory.

Press brake safety for the EU market →

What your team receives

You receive a written review tied to the machine model, configuration and documents examined. It records the findings in order of priority and explains what each one means for the project.

Your engineering team can use the review to revise a design and plan validation. Your purchasing team can use it to agree technical deliverables with the supplier. If the model belongs to a wider series, we can also review how later design changes affect the original findings.

EU machinery requirements for your delivery

The EU Machinery Regulation (EU) 2023/1230 applies from 20 January 2027 to new presses first placed on the EU market from that date. Presses lawfully placed on the EU market under the Machinery Directive 2006/42/EC before that date may continue to be made available. For a machine ordered in 2026 and due for delivery in 2027, the date it is first placed on the EU market therefore matters.

We consider the applicable requirements, the relevant press-specific standards and the evidence available for the proposed design. Our findings support the manufacturer’s conformity assessment and help the importer clarify outstanding technical points with the supplier. The manufacturer retains responsibility for the conformity assessment and declaration.

Practical experience with press safety

Over the years, we have retrofitted dozens of machines, including press brakes, mechanical presses and hydraulic presses. On many of these projects, we have worked with Wiechern Engineering and with specialist hydraulics companies such as Viereck in Elmshorn.

Our retrofit experience includes Delem and Cybelec CNC controls, safeguarding devices from Fiessler, Pilz and Lazer Safe, and a range of safety controllers. Alongside this work, we carry out press safety inspections and measure their stopping performance. This gives us practical experience of how the CNC control, safety controller, safeguarding devices and drive interact on the finished machine.

The projects featured on our website illustrate the range of this work. On a Placke HQPBM4 press brake, we integrated a Delem DA-58T CNC control with a Fiessler safety controller and AKAS optical safeguarding. On a six-metre HERA press brake in Spain, we installed a Cybelec CybTouch control and renewed the safety technology. On an IMS mechanical press, we replaced the machine and safety controls and integrated the press into the existing automated production line.

View selected press projects →

Discuss your press project

Tell us which press you are developing or buying, what it will be used for and which decision you need to make next. If you have a model designation, supplier specification or general arrangement drawing, include it with your enquiry. A short project description is enough for an initial discussion.

We will identify the information needed for the review and agree the scope with you.

Request a press safety design review →